The performance of the products are stated under standard test conditions. Design and specifications may change due to continuous improvement.
Hinomoto 180DT
ENGINE | |
| MODEL | K3C |
| Type | 3 Cylinder, 4 Stroke, Over Head Valve |
| Bore | 70mmn (2.75in) |
| Stroke | 78mmn (3.07in) |
| Displacement (Swept Volume) | 900cu.cm (54.9 cu.in) |
| Max. Torque | 5.2kg-m (1900 rpm) 52 Nm |
| Output/Rated | 18.5 hp/2799 rpm (IS: 10,000)Pto. 22.5hp Enjin |
| S.F.C. (specific Fuel Consumption) | 230 gm/hp-hr |
| Cooling System | Water-cooled Radiator with compensatory tank |
| Dry Weight | 125 kgs |
| Starting System | Starter Motor 12 Volts – 1.6KW |
FUEL SYSTEM | |
| Fuel | High Speed Diesel Oil (H.S.D) |
| Fuel Tank Capacity | 18 liters |
| Air Cleaner | Dry element type |
LIGHTIING SYSTEM | |
| Lighting | 12 volts, 35 watts |
| Alternator | 12 volts, 40 Amps |
| Glow Plug | 12 volts Quick Hear Type |
TRANSMISSION | |
| Transmission | Selective Sliding Gear |
| Forward | 6 Speeds |
| Reverse | 2 Speeds with differential lock |
| Travelling Speed | 1.2 kmph(min.)/14.0 kmph (max.) |
| Power Take Off (P.T.O) | 13/8” – SAE std Spline Shaft, 3 speeds |
| 623, 919 & 1506 RPM at 2700 eng. rmp | |
| Brake | Water proof internal expanding shoe type brake |
| with parking brake | |
TRACTOR | |
| Overall Dimensions | Width 1025mm, Height 1475mm |
| Length 2565mm, Wheel Base 1422mm | |
| Tyres | Front 5-12, Rear 8-18 |
| Track Width 740, 890 mm | |
| Ground Clearance | 190 mm |
| Turning Radius | W/o Brake 2.5m & W/Brake 2.1m |
| Hauling | 2 Wheel Trailer, 3 Tones (Gross weight) |
| Rotary | Side Drive Type, Width 1100mm |
| Weight | 645kgs (W/o ballast weight) |
PERFORMANCE | ||
| Tilling Width | 1100mm | |
| No. of Tines | 28 | |
| Tilling Depth | 270 mm | |
SPEEDS (Standard Pulley) | Low | ||||
| Forward | L1 | 1.23 km/hr | Reverse | High | 1.58 km/hr |
| L2 | 1.87 km/hr | 6.93 km/hr | |||
| L3 | 3.18 km | ||||
| H1 | 5.43 km/hr | ||||
| H2 | 8.22 km/hr | ||||
| H3 | 13.98 km/hr | ||||